ZI-Annual and ZI Brick and Tile Industry International
are published by
| Publications |
2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 before 1990
|
ZI-Annual and ZI Brick and Tile Industry International
are published by |
 |
Junge, K.; Tretau, A.; Jung, D |
|
|
JuJunge, K.; Tretau, A. The end of the continuum? ZI Ziegelindustrie international 61 (2008) Nr. 9, p. 23 ff  |
|
|
Junge, K.; Tretau, A., Specht, E. Drying of green bricks; material-related principles, kinetics and energetics. ZI-Annual 2008, p. 28 ff, Bauverlag BV GmbH, Gütersloh |
|
|
Ruppik, M. Use of low-energy pore-forming agents far further quality improvement of light weight vertically perforated bricks. ZI-Annual 2008, p. 72 ff, Bauverlag BV GmbH, Gütersloh |
|
|
Junge, K., Tretau, A. Energy expenditure for drying of green bricks in chamber dryers Zi-annual (2007), p. 25 ff Bauverlag BV GmbH, Gütersloh |
|
|
Ruppik, M., Hauck, D., Petereit, S. Fast-firing properties of raw materials for facing bricks and roofing tiles Zi-annual (2007), p. 45 ff Bauverlag BV GmbH, Gütersloh |
|
|
Junge, K. Current research - Report from the Brick and tile Research Institute Zi-annual (2007), p. 116 ff Bauverlag BV GmbH, Gütersloh
|
|
|
Junge, K.; Tretau, A. Increasing the energy efficiency of drying plants through the use of modern low-energy dryers ZI Ziegelindustrie international 60 (2007) Nr. 9, p. 22-31
|
|
|
Junge, K., Petereit, S. |
|
|
Ruppik, M. Use of organic and inorganic pore-forming agent in the brick and tile industry Ziegelindustrie international 59 (2006) H. 8, p. 22 ff Bauverlag BV GmbH, Gütersloh |
|
|
Rimpel, E. Use of renewable energy coops and other substitute fuels for firing bricks Ziegelindustrie international 59 (2006) H. 8, p. 30 ff Bauverlag BV GmbH, Gütersloh |
|
|
Roßbach, M. New requirements for storm clamping of clay roofing tiles Ziegelindustrie international 59 (2006) H. 6 - 7, p. 30 ff Bauverlag BV GmbH, Gütersloh |
|
|
Rimpel, E. Fillings in vertically perforated bricks and their effects on the thermal and acoustic insulation ZI-Annual 2006, p. 23 ff, Bauverlag Springer Baumedien Gütersloh |
|
|
Junge, K. Research - update Report from the Brick and Tile Research Institute ZI-Annual 2006, p. 148 ff, Bauverlag Springer Baumedien Gütersloh |
|
|
Junge, K.; Specht, E.; Telljohann, U.; Deppe, D. Drying of green bricks ZI-international (2005) No. 8, p. 39 ff, Bauverlag Springer Baumedien Gütersloh |
|
|
Junge, K.; Tretau, A.; Petereit, S.; Popken, S. Microwave drying - Not an alternative for the drying of shrinking green products! ZI-international (2005) No. 12, p. 8 ff, Bauverlag Springer Baumedien Gütersloh |
|
|
Rimpel, E. Status quo of CO2 emissions in the German brick and tile industry ZI-international (2005) No. 7, p. 8 ff, Bauverlag Springer Baumedien Gütersloh |
|
|
Junge, K., Telljohann, U. |
|
|
Junge, K.; Deppe, D. Drying efflorescence - Influence of the dryer climate on the diffusion of calcium sul-phate in green bricks ZI-Annual 2005, p. 35 ff, Bauverlag Springer Baumedien Gütersloh |
|
|
Hauck, D.; Ruppik, M.; Petereit, S. Laboratory Simulation of Through-flow Firing of Vertically Perforated Clay Bricks ZI-Annual 2005, p. 50 ff, Bauverlag Springer Baumedien Gütersloh |
|
|
Roßbach, M.; Schmidt, U.; Schubert, P. Re-evaluation of the shear capacity of masonry ZI-Annual 2005, p. 78 ff, Bauverlag Springer Baumedien Gütersloh |
|
|
Junge, K. |
|
|
Junge, K., Telljohann, U., Deppe, D. Energy saving through utilization of cooling air in the tunnel kiln and dryer ZI-international (2004) No. 3, p. 12 ff |
|
|
Telljohann, U., Junge, K., Deppe, D. Drying of green bricks - Practical effects of new scientific findings ZI-international (2004) Heft 3, p. 31 ff |
|
|
Rimpel, E., Rehme, F. Additives to reduce the extrusion moisture and the power consumption in the shap-ing process ZI-Annual 2004, Bauverlag Gütersloh, p. 41 ff |
|
|
Junge, K., Telljohann, U., Deppe, D. Decoupling of kiln and dryer operation ZI-Annual 2004, Bauverlag Gütersloh, p. 20 ff |
|
|
Hauck, D., Ruppik, M., Petereit, S. Increasing the strength of foam pore-formed bricks by sintering-promoting additives ZI-Annual 2004, Bauverlag Gütersloh, p. 53 ff |
|
|
Junge, K. |
|
|
Junge, K., Telljohann, U. Firing of lightweight, vertically perforated bricks with high energy loading due to pore-forming agents Zi-Annual 2003, p. 69-84 |
|
|
Hauck, D., Ruppik, M. Different firing chamber atmosphers for the improvement of lime bonding Zi-Annual 2003, p. 85-113 |
|
|
Rimpel, E., Pauls, N. Modification of fluorine cleaning plants for improved adsorption of hydrogen chloride Zi-Annual 2003, p. 32-46 |
|
|
Junge, K. |
|
|
Hauck, D., Ruppik, M., Telljohann, U. Optimization of the drying process to reduce the risk of drying cracks in green bricks and tiles Zi Brick and Tile Industry International (2002), No. 4, p. 52-54 |
|
|
Hauck, D., Ruppik, M. Increasing the frost resistance capacity of facing bricks and clay roofing tiles by changes to the raw material, Part 2 Zi-Annual 2002, p. 21-46 |
|
|
Pauls, N. Tests on the lime blowing effect of dolomite and magnesium carbonate in the brick Zi-Annual 2002, p. 67-77 |
|
|
Roßbach, M. Influence of the Upper Ventilation Level of Thermally Insulated Roofs on the Dry-Out Behaviour of Roof Tiles Zi-Annual 2002, p. 78-87 |
|
|
Rimpel, E. Potentialities and limits of direct flow drying of vertically perforated clay bricks in comparison with conventional convection drying in large areas Zi-Annual 2002, p. 103-122 |
|
|
Junge, K. Research current - Report from the Institut für Ziegelforschung Zi-Annual 2002, p. 132-143 |
|
|
Spitzner, M. H. Correlation of the measured results for the thermal conductivity of bricks from wall- and half-brick measurements Zi-Annual 2001, p. 41-48 |
|
|
Hauck, D., Ruppik, M. Increasing the frost resistance capacity of facing bricks and clay roofing tiles by changes to the raw material Zi-Annual 2001, p. 118-146 |
|
|
Hauck, D., Ruppik, M. Extension of the optimum product firing curve to through-flow firing Zi Brick and Tile Industry International (2000), No. 6, p. 60-62 |
|
|
Junge, K. Additives in the brick and tile industry Zi Brick and Tile Industry International (2000), No. 12, p. 25-39 |
|
|
Hauck, D., Ruppik, M., Hörnschemeyer, S., Richter, F. Increasing the ceramic body strength and reduction of the thermal conductivity by raw materialspecific measures Zi-Annual 2000, p. 54-77 |
|
|
Junge, K. Energy saving by heating of the combustion air Zi-Annual 2000, p. 78-85 |
|
|
Pauls, N., Telljohann, U. Reduction of dryer scumming by influencing the drying conditions Zi-Annual 2000, p. 86-109 |
|
|
Rimpel, E., Spitzner, M. H. Development of a composite ceramic thermal insulating system Zi-Annual 2000, p. 110-139 |
|
|
Roßbach, M., Greiff, M. Moisture expansion of brick masonry Zi-Annual 2000, p. 140-152 |
|
|
Hauck, D., Ruppik, M. Influence of water-repellent treatment on the quality of heavy clay products Zi Brick and Tile Industry International (1999), No. 4, p. 50-53 |
|
|
Junge, K. Rapid drying and fast firing Zi-Annual 1999, p. 44-57 |
|
|
Junge, K. Limits of the thermal utilization of organic raw material additives Zi-Annual 1999, p. 71-75 |
|
|
Rimpel, E. Flow and heat engineering tests on optimization of dryers and kilns in the brick and tile industry Zi-Annual 1999, p. 76-92 |
|
|
Junge, K. Effects of the ban on Sunday working on the energy consumption of heavy clay works Zi Brick and Tile Industry International (1998), No. 6, p. 327-336 |
|
|
Spitzner, M. H., Junge, K. Reduction of the thermal conductivity of clay bricks Zi-Annual 1998, p. 15-27 |
|
|
Rimpel, E. Influence of the mineral constituents and equilibrium moisture on the thermal conductivity of bricks Zi-Annual 1998, p. 28-52 |
|
|
Hauck, D., Ruppik, M., Hörnschemeyer, S., Richter, F., Henschker,
B. Influence of the raw material composition on the strength and thermal conductivity of vertically perforated clay bricks and blocks Zi-Annual 1998, p. 54-80 |
|
|
Roßbach, M. Capillary suction property of bricks - Possibilities for the description of the capillary suction property of bricks and its influence on the strength of the bed joint mortar Zi-Annual 1998, p. 90-101 |
|
|
Pauls, N. Reduction of sulfur oxide emissions during firing in tunnel kilns by additives in the raw material Zi-Annual 1998, p. 117-129 |
|
|
Junge, K. Combustion calculation in the brick and tile industry Zi-Annual 1997, p. 50-54 |
|
|
Hauck, D., Ruppik, M. Reduction in the mixing water requirement and in the drying energy by means of optimized hot extrusion Zi-Annual 1997, p. 55-95 |
|
|
Junge, K., Spitzner, M. H. Foamed clay bricks as insulating material Zi-Annual 1997, p. 96-110 |
|
|
Hauck, D., Krützner-Brezynski, B., Ruppik, M. Different firing chamber atmospheres for improvement of product properties Zi Brick and Tile Industry International (1995), No. 11, p. 851-859 L'Industria die Laterizi (1996), No. 40 (July/Aug.), p. 228-234 (Italian) |
|
|
Roßbach, M. Improvement of the transverse strength proporties of lightweight vertical coring clay bricks and blocks by optimization of the web geometrie Zi-Annual 1996, p. 24-33 |
|
|
Spitzner, M. H. Tests on the behaviour of lightweight, vertical perforated, clay masonry units Zi-Annual 1996, p. 34-56 |
|
|
Hauck, D., Ruppik, M., Krützner-Brezynski, B. Fast firing of large-size, vertically perforated clay units by optimization of the raw material composition Zi-Annual 1996, p. 57-92 |
|
|
Junge, K. Data on moist air-drying technology Zi-Annual 1996, p. 128-135 |
|
|
Pauls, N. Tests on the recyclability of the reaction product from flue gas cleaning plants to reduce fluorine concentration in the brick and tile industry Zi-Annual 1996, p. 160-173 |
|
|
Rimpel, E. Industrial production of high-porosity brick materials Zi-Annual 1996, p. 174-207 |
|
|
Junge, K. Possibilities and limits of fast firing in the brick and tile industry Zi-Annual 1995, p. 15-22 |
|
|
Rimpel, E. Scope and limits of climate-controlled convection drying Zi-Annual 1995, p. 23-37 |
|
|
Rimpel, E. Brick firing in the Countertravel Kiln Zi-Annual 1995, p. 38-58 |
|
|
Hauck, D., Ruppik, M., Krützner-Brezynski, B. Potential application for natural stone dusts and sands for brickmaking Zi-Annual 1995, p. 60-99 |
|
|
Hauck, D., Ruppik, M., Krützner-Brezynski, B. Changing the plasticity by means of additives, clay disintegration and shaping temperature Zi-Annual 1995, p. 100-140 |
|
|
Sterneck, D. The causality of cracked rendering Zi-Annual 1995, p. 142-180 |
|
|
Jung, E. Filling of small, storey-high channels in reinforced masonry to give a sealed microstructure Zi-Annual 1995, p. 181-197 |
|
|
Junge, K. Essential conditions for the recycling of filter residues and sediments from potable water recovery at heavy clay works Zi Brick and Tile Industry International (1994) |
|
|
Junge, K. Porous lightweight clay bricks and blocks - A Stepp towards a better environment? Zi Brick and Tile Industry International (1994), No. 1, p. 35-38 |
|
|
Hauck, D., Hilker, E., Krützner-Brezynski, B., Ruppik, M.
Reducing the risk of preheating cracks in large-size clay masonry blocks Zi-Annual 1994, p. 44-77 |
|
|
Junge, K., Pauls, N. Pore-forming of lightweight, vertical coring bricks and blocks - Ecological evaluation of the production process Zi-Annual 1994, p. 90-96 |
|
|
Jedamzik, H.-W. Contraction and expansion - deformation of building materials under the influence of moisture Part 1: Zi Brick and Tile Industry International (1993), No. 5, p. 296-302 Part 2: Zi Brick and Tile Industry International (1993), No. 7-8, p. 456-462 |
|
|
Rimpel, E. Effects of the Heat Utilization Order on production processes in the brick and tile industry Zi Brick and Tile Industry International (1993), No. 2, p. 98-102 |
|
|
Junge, K. Increasing the temperature of the green ware in order to reduce drying shrinkage Zi-Annual 1993, p. 11-22 |
|
|
Jung, E. Long-term experience of the preservation and driving rain resistance of facing brickwork Zi-Annual 1993, p. 112-135 |
|
|
Rimpel, E. |
|
|
Junge, K. Enthalpy-Moisture Diagram according to Mollier Zi-Annual 1992, p. 12-15 |
|
|
Hauck, D., Hilker, E., Ruppik, M. The influence of the firing chamber atmosphere on heavy clay products Zi-Annual 1992, p. 16-30 |
|
|
Junge, K. Reduction of sulphur emissions in the thermoreactor Zi-Annual 1992, p. 32-46 |
|
|
Hauck, D., Hilker, E., Ruppik, M. Reduction of fluorine emission by re-bonding in the preheating zone - Final evaluation Zi-Annual 1992, p. 47-73 |
|
|
Junge, K. Fast firing of flat settings and setting blades in energy-optimized tunnel kilns Zi-Annual 1992, p. 88-105 |
|
|
Hauck, D., Hilker, E., Ruppik, M. Prevention of preheating cracks and reduction phenomena with regard to the fast firing of large-size masonry bricks and blocks Zi-Annual 1992, p. 106-147 |
|
|
Jung, E. Economical solutions for brickwork reinforcement with the new DIN 1053 Part 3 Zi-Annual 1992, p. 158-174 |
|
|
Junge, K. Reducing tunnel kiln energy consumption in the brick and tile industry cfi/Ber. DKG (1991), No. 5, p. 195-199 |
|
|
Ketels, U. Study of low-temperature carbonization gas emission behaviour of brickmaking materials, Part 1 Zi Brick and Tile Industry International (1991), No. 10, p. 537-543 |
|
|
Ketels, U. Possibilities for the prevention of low-temperature carbonization gas emissions in the production of lightweight clay bricks and blocks Zi Brick and Tile Industry International (1991), No. 12, p. 658-663 |
|
|
Junge, K. Drying of heavy clay products - Problems and their solution Zi-Annual 1991, p. 9-19 |
|
|
Schellbach, G. Frost load on clay roofing tiles under natural conditions and simulation in the frost test method Zi-Annual 1991, p. 56-69 |
|
|
Hauck, D., Hilker, E., Ruppik, M. Increasing the frost resistance of ceramic products by optimization of the raw material composition and by means of the firing process Zi-Annual 1991, p. 70-84 |
|
|
Hauck, D., Jung, E. Optimization of the clay body of vertical coring, lightweight clay bricks and blocks Zi-Annual 1991, p. 108-121 |
|
|
Schellbach, G., Jung, E., Jedamzik, H.-W. Statically and thermally optimized lightweight clay bricks or blocks for prefabricated wall panels Zi-Annual 1991, p. 122-135 |
|
|
Pauls, N. Changes in the efflorescent salts content of the system bricks-mortar Zi-Annual 1991, p. 144-153 |
|
|
Hauck, D., Ruppik, M., Hilker, E. Reduction of fluorine emission by re-bonding in the preheating zone Zi-Annual 1991, p. 154-170 |
|
|
Ketels, U. Possibilities for obtaining uniform temperature distribution in the tunnel kiln setting Zi Brick and Tile Industry International (1990), No. 7-8, p. 410-419 |
|
|
Hauck, D., Hilker, E., Ruppik, M. Influence of the firing process on frost resistance Zi Brick and Tile Industry International (1990), No. 9, p. 501-507 |
|
|
Pauls, N. Influence of the pore-forming agent and the operating conditions on low-temperature carbonization gas emission in brickmaking Zi-Annual 1990, p. 67-79 |
|
|
Ketels, U. Possibilities for reducing the exhaust gas volume in tunnel kilns Zi-Annual 1990, p. 80-86 |
|
|
Ketels, U. Optimization of the use of landfill gas and other types of lean gas Zi-Annual 1990, p. 87-94 |
|
|
Hauck, D., Hilker, E., Ruppik, M. Additives for product improvement and reduction of the final firing temperature in brick firing Zi-Annual 1990, p. 95-116 |
|
|
Jung, E. Guide to the calculation of statically advantageous cross-sections of thermal insulating bricks and blocks Zi-Annual 1990, p. 117-139 |
|
|
Jung, E. Improvement of the properties of brick masonry by the use of mesh reinforcement in the bed joints Zi-Annual 1990, p. 154-166 |
|
|
Pauls, N. Survey of the emission of pollutants in brick and tile production Zi-Annual 1989, p. 69-77 |
|
|
Hauck, D., Hilker, E. Moisture expansion behaviour of bricks Zi-Annual 1989, p. 13-26 |
|
|
Hauck, D., Ruppik, M. Influence of additives on shaping Zi-Annual 1989, p. 34-46 |
|
|
Schellbach, G., Stern, H. Quality control of masonry bricks Ziegelindustrie International (1988), No. 5, p. 204-216 (Part 1), No. 6, p. 274-282 (Part 2) |
|
|
Hauck, D., Hilker, E., Hesse, E. Construction Ceramics in: Ullmann's Encyclopedia of industrial chemistry 5. edition, Vol. A7, p. 425-460 VCH Verlagsgesellschaft mbH, Weinheim (1986) |
|
|
Bender, W., Händle, F. Brick And Tile Making, Procedures and Operating Practice in the Heavy Clay Industries Bauverlag, Wiesbaden und Berlin (1982) |
|
|
IZF Essen e. V. 2002