2019
-
R. Wagner, F. Bonitz, A.Tretau
Feuchtebestimmung in Ziegelrohlingen mit einem UWB-Radar, 10. CMM Tagung 2019, Ettlingen - D. Ivanova, L. Etscheid
Entwicklung eines numerischen Simulationsmodells zur Bestimmung der Schalldämmung von Hochlochziegeln, Ziegelindustrie International 05/2019, Bauverlag BV GmbH, Gütersloh -
A. Winkel
Herstellung schallabsorbierender Ziegel mit dem Replica-Verfahren, Essen, 02/2019 - A. Tretau
CORNET project Shortstore: Thermal storage in the ceramic industry, case studies. 5th International Conference on Industrial Waste Heat Valorisation, Kortrijk, Belgium 05/2019 (mehr: http://www.wasteheat.eu/programme.html) -
M. Powilleit, J. Wasserfall, S. Kirschbaum, A. Tretau, D. Steinmann
Energy system optimization with short term storages respecting nonlinear temperature dependencies. ECOS Conference Proceedings, Wrocław, Poland 06/2019 -
N. Vorhauer, A. Tretau, R. Wagner, E. Tsotsas
Abhängigkeit der Feuchteprofile von Frequenz und Länge des Leistungseintrages bei der intermittierenden Mikrowellentrocknung von feuchten Tonziegeln, Vortrag Processnet Trocknungstechnik, Essen, 03/2019 -
Vorhauer, A. Tretau, A. Bück, and M. Prat
Microwave drying of wet clay with intermittent heating, Drying Technology, 02/2019 -
Dipl.-Ing. A. Winkel
Schall schluckender Ziegel macht Räume schön und ruhig, ZUSE Gemeinschaft, 02/2019
2018
- Vorhauer, N; Tretau, A.; Bück, A.; Tsotsas, E
Intermittend microwave drying – feasibility study for application in industrial processes, Vortrag Processnet Wärme-und Stoffübertragung, Bremen, 03/2018 -
Tretau, A.; Powilleit, M.; Kirschbaum, S
Short-term heat storage in the heavy clay industry; Zi international Bauverlag Gütersloh, 4/2018 -
Dr.-Ing. Anne Tretau
Kurzwärmespeicher in der Ziegelindustrie, Vortrag zum 4. Heavy Clay Day, Ceramitec München, 4/2018 - Wagner, R.; Bonitz, F.; Tretau, A
Electrical Properties of Green Bricks. In: 12th International Conference on Electromagnetic Wave Interaction with Water and Moist Substances (ISEMA 2018), Lublin, Poland, 4–7 June 2018. Piscataway, NJ: IEEE, 2018, 103-105, pp. 28–30
2017
- Vorhauer, N.; Ahmad, R.; Dürr, R.; Tretau, A.; Bück, A.; Tsotsas, E.; Prat, M
Radiation dyring of porous media, Vortrag Processnet Trocknungstechnik, Bruchsal 02/2017 -
Dr.-Ing. Anne Tretau
Effektive Trocknerführung durch materialspezifische Feuchtebestimmung – Teil 1: Materialdaten - Vorhauer, Nicole; Ahmad, Faeez; Tretau, Anne; Bück, Andreas; Tsotsas, Evangelos; Prat, Marc
Pore scale investigation of drying under periodic temperature variation In: EuroDrying'2017: 6th European Drying Conference; 19, 20, 21 June 2017, University of Liège, Belgium - Liège: University, 2017 -
Vorhauer, Nicole; Mirsadraee, N.; Tretau, Anne; Bück, Andreas; Tsotsas, Evangelos; Prat, Marc
Combined convectice and microwave drying of wet clay In: Second Nordic Baltic Drying Conference: 7-9 June 2017, Hamburg, Germany; proceedings - Hamburg, 06/2017 -
Dr.-Ing. Anne Tretau
in der Ziegelindustrie; Vortrag Würzburger Ziegellehrgang Würzburg, 12/2017 -
Tretau, A; Powilleit, M.; Kirschbaum, S.
Kurzzeitwärmespeicher in der Ziegelindustrie; Vortrag Würzburger Ziegellehrgang, Würzburg, 12/2017 - Winkel, A.
Das Potential der Replikatechnik für die Ziegelindustrie; Vortrag Würzburger Ziegellehrgang, Würzburg, 12/2017
2016
- Dipl.-Ing. Eckhard Rimpel
Einfluss der Atmosphäre auf den Tunnelofenprozess, Ziegelindustrie 08/2016 - Dipl.-Ing. Michael Ruppik
Verschleppung von Rohstoffreaktionen in der Aufheizzone zur energetischen Nutzung kohlenstoffhaltiger Massebestandteile, Ziegelindustrie 08/2016
2015
- M.Sc. Leonard Raumann, Dipl.-Ing. Mirko Landmann(IAB)
Sensor- assisted sorting process for recycling construction materials
Brick and Tile Industry International 08/2015, Bauverlag BV GmbH - B.eng. Daniel Schnabel
Influence of the pH value on the plasticity of clay bodies for bricks
Brick and Tile Industry International 08/2015, Bauverlag BV GmbH
- Dipl.-Ing.(FH) M.Sc. Alexander Winkel
Sol-Gel- process for energy efficient heavy clay products
Brick and Tile Industry International 08/2015, Bauverlag BV GmbH - Dr.-Ing. Anne Tretau
Clay brick and tile making – fit for the future?
Brick and Tile Industry International 08/2015, Bauverlag BV GmbH - Dipl.-Ing. Eckhard Rimpel
Use of heat pumps in brick drying
Brick and Tile Industry International 08/2015, Bauverlag BV GmbH
- Dipl.-Ing. Eckhard Rimpel
Syngas for sustainable clay brick and roofing tile production
(Part 2)
Brick and Tile Industry International 05/2015, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Eckhard Rimpel
Syngas for sustainable clay brick and roofing tile production
(Part1)
Brick and Tile Industry International 04/2015, Bauverlag BV GmbH, Gütersloh
2014
- Dipl.-Ing. Michael Ruppik und Dipl.-Ing. Sandra Petereit
Causes and avoidance of firing-related damage Part 2: Strength-reducing reactions in the heating-up zone from 500 to 800° C
Brick and Tile Industry International 04/2014, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Alexander Winkel
Energy-conserving options for the brick shaping process (Part 2)
Brick and Tile Industry International 01/2014, Bauverlag BV GmbH, Gütersloh
2013
- Dipl.-Ing. (FH) M.Sc. Alexander Winkel und Dipl.-Ing. Eckhard Rimpel
Energy-conserving options for the brick shaping process (Part 1)
Brick and Tile Industry International 12/2013, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Michael Ruppik
Causes and avoidance of firing-related damage Part 1: Diffusion-dependent reactions in the heating-up zone up to 500°C
Brick and Tile Industry International 11/2013, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Eckhard Rimpel
Advantages of air circulators in the firing channel
Brick and Tile Industry International 11/2013, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Sandra Petereit
Avoiding product damage
Brick and Tile Industry International 11/2013, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Michael Ruppik
From mine to building element testing
Brick and Tile Industry International 11/2013, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Eckhard Rimpel
Energy aspects of incorporating heavy metal companion minerals into clay masonry units via combustion-engineering measures in a tunnel kiln
Brick and Tile Industry International 10/2013, Bauverlag BV GmbH, Gütersloh - Dr.-Ing. Anne Tretau
Energy-saving methods of conditioning green brick bodies for low-temperature drying
Brick and Tile Industry International 05/2013, Bauverlag BV GmbH, Gütersloh
2012
- Dipl.-Ing. Michael Ruppik, Dr.-Ing. Christoph Butenweg (LBB)
Application of the capacity spectrum method to the theoretical verification of masonry structures under seismic loading
Brick and Tile Industry International 12/2012, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Michael Ruppik
51th Brick and Tile Seminar in Würzburg 2012: Frost resistance of high-porosity vertically perforated bricks
Brick and Tile Industry International 11/2012, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Eckhard Rimpel
51th Brick and Tile Seminar in Würzburg 2012: Use of synthetic gas for firing heavy clay products
Brick and Tile Industry International 11/2012, Bauverlag BV GmbH, Gütersloh - Dr.-Ing. Ullrich Knüpfer
51th Brick and Tile Seminar in Würzburg 2012: Rising energy costs – how can the clay brick and tile industry respond?
Brick and Tile Industry International 11/2012, Bauverlag BV GmbH, Gütersloh - Dr. -Ing. Anne Tretau
Formation of pores and voids during the end phase of drying green bricks with swelling additive content
Brick and Tile Industry International 11/2012, Bauverlag BV GmbH, Gütersloh - Dipl. -Ing. Eckhard Rimpel, Dipl. -Ing. Sandra Petereit
Reducing energy expenditures for brick production by use of vibrating cutters
Brick and Tile Industry International 10/2012, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Michael Ruppik
Optimization of the strength properties of clay masonry bricks
Brick and Tile Industry International 7-8/2012, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Eckhard Rimpel
Saving energy in clay brick production by use of vibrating cutting wires
Brick and Tile Industry International 05/2012, Bauverlag BV GmbH, Gütersloh
2011
- Dr. -Ing. M. Roßbach
Theoretical and empirical studies on the shear loading capacity of clay brick masonry
Brick and Tile Industry International 12/2011, Bauverlag BV GmbH, Gütersloh
Dr. -Ing. Anne Tretau, Dipl.-Ing. Eckhard Rimpel
Construction Ceramics
Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim - Prof. Dr.-Ing. E. Specht, M. Sc. P. Meng, Dr.-Ing. A. Tretau, Dipl.-Ing. E. Rimpel
The solid-solid recuperator – a forced-convection tunnel kiln for higher energy efficiency
Brick and Tile Industry International 1-2/2011, Page 10-21, Bauverlag BV GmbH, Gütersloh - Dr.-Ing. Anne Tretau
Measures for reducing the effects of moisture on expansion and contraction processes and on loss of strength in industrially produced adobe bricks
Zi Annual 2011, Page 16-45, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Michael Ruppik
Causes and avoidance of damage on account of diffusion-dependent reactions in the preheating zone of tunnel kilns
Zi Annual 2011, Page 58-76, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Eckhard Rimpel
Current research – Report from the Brick and Tile Research Institute
Zi Annual 2011, Page 126-134, Bauverlag BV GmbH, Gütersloh
2010
- Dipl.-Ing. Eckhard Rimpel
The brick and tile industry in India – Current situation and development options
Brick and Tile Industry International 1-2/2010, Page 10-16, Bauverlag BV GmbH, Gütersloh - Dr.-Ing. Karsten Junge; Dr.-Ing. Anne Tretau; Dipl.-Ing. Dominic Jung
Influence of the inner surface of drying green ceramic products on their moisture-dependent tensile strength
Zi Annual 2010, Page 18-30, Bauverlag BV GmbH, Gütersloh - Dr.-Ing. Anne Tretau, Dr.-Ing. Karsten Junge
Heat economy in brick and tile plants
Zi Annual 2010, Page 32-53, Bauverlag BV GmbH, Gütersloh - Dipl.-Ing. Eckhard Rimpel
Combustible caking in tunnel-kiln exhaust systems – Causes and prevention
Zi Annual 2010, Page 88-114, Bauverlag BV GmbH, Gütersloh - Dr.-Ing. Karsten Junge
Current research – Report from the Brick and Tile Research Institute
Zi Annual 2010, Page 131-138, Bauverlag BV GmbH, Gütersloh